The best way to Debug an Automobile GPS
1Make certain the route preferences are set to your preference for calculating the route. In the setup menu, pick "Faster Time" to calculate routes which are more rapidly to drive but may be longer in distance. These routes may possibly contain freeways and toll roads, and also you may add much more miles for your car over time. Select "Shorter Distance" to calculate the routes which are as short as possible but may take more time to drive due to other elements.
2Check the "Avoidances" setting. This can be named "Road Types" or other labels as well. Ensure that the types of road you need to utilize are enabled. For instance Obd2 scanner, you can enable or disable highways, toll roads, ferries and unpaved roads. Should you have website traffic monitoring built in, you are able to set the device to prevent website traffic.
3The audio prompts could be set on or off. You are able to switch off the focus tone and also the audio voice---the voice that announces the routes. If the audio voice has stopped functioning, then check this menu item to determine if it is off.4Reboot the device in the event the outlined actions above have not corrected your dilemma. As a last resort, ust the "Restore Settings" menu item inside the navigation settings to restore the device to its factory state. It is not going to restore your settings Auto diagnostics, however it will most likely repair any bugs.
Related articles:
没有评论:
发表评论