auto diagnostic software 2Locate the fuse for the electronic handle unit

How to Reset the Laptop on a GMC 1Open the door on your GMC vehicle and find the port to the left on the fuse panel.2Plug the electrical connector from the OBD scan tool in to the OBD port.3Turn the ignition key to the "II" position.4Wait for the check engine light to go out car diagnosis tool. At this point, your engine codes will be reset.

You will also get a reading on your OBD scan tool, which will tell you any error codes. Some tools have a "reset" button, which allows you to control the resetting with the laptop rather than letting the scan tool automatically clear the codes. How to Reset the Computer system on a Mitsubishi Montero 1Pull down the fuse panel cover of your Montero. The fuse panel is positioned in the driver side footwell, beneath the steering column.

2Locate the fuse for the electronic handle unit, or ECU. Use the fuse diagram on the underside of the fuse panel cover to find the ECU fuse.3Pull the ECU fuse employing the fuse pullers which can be mounted in the fuse panel.4Turn on the ignition, but don't try to crank the engine auto diagnostic software.5Wait five minutes and after that insert the fuse back in to the fuse panel. The "check engine" light on the dash of one's Montero will blink several times and then shut off. This will indicate that the personal computer has been reset.