auto diagnostics software When the codes are read

How you can Reset the P0456 on a Ford 1Connect the scan tool towards the Ford's diagnostic port, located subsequent for the steering column below the driver's side from the dashboard.

The port will have a small cover over it with the letters "DTC" auto diagnostics software; embossed on the face with the cover. Pull that cover off to access the port.You are able to purchase a scan tool at your neighborhood auto parts shop. Ensure the scan tool you will be keen on purchasing functions with Ford cars.2Run a self test on the system by following the directions within your scan tools distinct owner's manual.

When the codes are read, ensure that the P0456 could be the only code present just before erasing the codes. If a different code is present, you are going to have to have to have it diagnosed and corrected just before you clear the codes Obd2 scanner.3Erase the code when prompted to perform so by the scan tool. Total the self test and disconnect the scan tool. Replace the diagnostic port cover.