diagnostic car tool

Ways to Repair the Verify Engine Light on a '91 Lexus LS400 1Open the fuse panel under the steering column in the driver's side footwell by pulling down on it.2Locate the plug that runs off from the main wiring harness. Auto tools

This is the on-board diagnostic access port. Plug your scan tool into this port.3Turn on the scan tool and turn the ignition to the "on" position.4Press the "clear" button on your scan tool to clear all engine codes.

This will repair the "examine engine" light. However diagnostic car tool, if you have not taken care of the underlying problem (i.e. the malfunctioning sensor causing the "check engine" light to come on) the light will come back on again.

Ways to Repair John Deere Diagnostic Code SSU 522451.14 1Open the engine compartment and get rid of the unfavorable battery cable together with the adjustable wrench.

2Locate the back side of the steering wheel column inside the engine compartment and locate the compact box mounted to the shaft that's connected to a plastic wiring harness.

That is the steering wheel position sensor3Unplug the wiring harness by hand and get rid of the retaining screw holding the old sensor in spot using a Phillips screwdriver.4Attach the new switch with all the screwdriver and plug it into the plastic wiring harness.5Replace the Deere's negative battery cable with the adjustable wrench.

Related articles: