Ways to Study Diagnostic Codes for the 1995 Chevy Lumina V.6 1Find the fuse panel cover under the steering wheel. Pull down on it from the prime utilizing your fingers.2Find the port towards the left side of your fuse panel. Plug the OBD scan tool into this port.3Put the key into the ignition and turn it on but don't begin the engine.
Uncover the on/off switch on the scan tool and turn it on.4Wait for the scan tool to study the codes. Write these codes on a piece of paper. Turn off the scan tool and unplug it from the port Auto tools. Turn off the automobile.5Look up the meaning in the codes inside the scan tool's manual. Ways to Study DTC Codes on a Ford Taurus 1Climb into the driver’s seat and connect the scan tool to the DTC port located under the dashboard near the steering column. The port is rectangular with a plastic cap covering it.
The cap should have the letters “DTC” embossed on it. You can purchase a scan tool at any major auto parts store or from a local professional tool vendor.2Refer to the scan tool&rsquo auto diagnostic;s directions on tips on how to perform a self-test on the system then run the self-test.3Record the codes the scan tool retrieves on a piece of paper. Do not clear the codes when prompted to do so unless you are certain you have repaired the malfunction that triggered the codes in the first place.4Refer to the list of DTCs that came with the scan tool to determine which pinpoint test to use in order to repair the malfunction.
Related articles:
没有评论:
发表评论