The way to Read the Engine Codes for any 340 Mopar 1Insert the ignition important in to the ignition.2Turn the essential on and off, cycling via the initial and second ignition positions. The precise sequence is: on-off-on-off-on. This ought to be completed inside 5 seconds.3Watch the "power limited" light on the dash and count the flashes.
There will be two sets of them. The initial set of flashes will happen, then a pause, after which the second set of flashes will take place. So, as an example, you may get 1 flash, then a pause, then seven consecutive flashes. This indicates error code "17." See Resources to get a complete list of the 340 motor's engine codes. The way to Read Difficulty Codes From a 2007 3200 Series International Truck 1Park the truck on a level surface and turn off the engine. Turn the ignition back towards the "ON" position so the dashboard has energy, however the engine just isn't operating auto diagnostics software.
2Connect an automotive scan tool for the truck's diagnostic information port Auto diagnostic tools. The diagnostic information port is positioned under the dashboard on the driver's side, for the correct in the steering column.3Power on the scan tool and wait though it boots up. Use the arrow keys on the scan tool to navigate by means of the main menu. Select the "PCM" alternative from the main menu.4Select "Read Codes" from the PCM menu. Write down the alphanumeric trouble codes displayed on the scan tool's screen.
Related articles:
没有评论:
发表评论